Taisheng pit annealing furnace is a standard energy-saving cycle operation annealing furnace in my country. Long rod-shaped workpieces, such as barrels, turbine shafts, rotors, etc., are vertically loaded and heated in the Taisheng pit furnace to prevent bending and deformation. All a…
Austenitic stainless steel needs solution treatment to soften. The process involves heating the stainless steel forging to about 950-1150°C and keeping it at this temperature for a period of time. This allows carbides and various alloying elements to dissolve evenly into the austenite…
Tai Sheng explains to you how to use the normalizing furnace effectively to save more money: Reasonable choice of energy ① Clean electricity and easy to control, such as the pit-type resistance furnace, which is an indirect heating workpiece with low thermal efficiency. The thermal ef…
Usually the friction coefficient will generate a lot of heat; Because of different thermal expansion coefficients, there may be thermal euphemisms when different materials are welded together; When the ambient temperature exceeds 400°C, the thermal expansion caused by the difference b…
The heating switch is not turned on, but the temperature still rises. The reason for this is that the contacts of the heating AC contactor are glued together and cannot be disconnected. The solution is to replace the contactor. The power supply trips after turning on the heating switc…
designed specifically for stainless steel products The continuous bright annealing furnace is a dedicated heat treatment system designed specifically for stainless steel products, especially for long strip materials such as stainless steel pipes and strips. The equipment achieves micr…
Drying and curing furnaces are generally divided into two types: mesh belt (tunnel) drying and curing furnaces, box (trolley) drying and curing furnaces and drum drying and curing furnaces, which are also used for sintering. Let's talk about the mesh belt (tunnel) drying and cu…
Product introduction: Our patented product improves the combustion method based on the characteristics of normal direct-fired burner flame direct burning. The main purpose is to prevent the product parts touched by the flame from being overburned or too high in temperature, while othe…
The working size of the furnace is 3000mm long, 2500mm wide, and 2500mm high. The annealing temperature is 600 degrees. To ensure a good annealing effect, we installed a 400mm thick aluminum silicate insulation layer and SS310 U-shaped heating tube for the customer. The heating tube i…